Atec Montena-PGCS106 - Manual

montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: [email protected]
CS106 Pulse Generator
This generator is designed for the test of the transients conducted susceptibility of power leads
according to MIL-STD-461F / CS106. These requirements are applicable to submarine and
surface ship equipment and subsystem AC and DC input power leads. The pulse generator
must be ordered with the active inductive coupler IC10M. Other accessories are available as an
option in order to build the full test set-up, basically consisting of a calibration load, an
oscilloscope, etc. The generator can be fully controlled by a computer through a RS232 or an
USB interface.
This generator is also available as a module which has to be installed inside the POG-CS116
modular generator.
SPECIFICATIONS
Reference PG-CS106 M-CS106
Type standalone generator module
Standard MIL-STD-461F CS106
Internal peak voltage up to 500 V
Peak current 8 – 100 A
Repetition rate 1 – 15 pulses per second
Rise time (0 – 100 %)
1.5 µs ± 0.5 µs (on 5 Ω)
Fall time (100 – 0 %)
3.5 µs ± 0.5 µs (on 5 Ω)
Pulse duration (0 – 0 %)
5 µs ± 22 % (on 5 Ω)
Output impedance
≤ 2 Ω
Output connector Hummel M23
Remote control RS232 and USB
Power supply
90 – 132 V
ac
or 170 - 264 V
ac
50 - 60 Hz / 150 VA
internal
Dimensions (W x H x L) 45 x 19 x 56 cm 23.5 x 6.5 x 24 cm
Weight 13 kg 1.2 kg