Atec Montena-EMP10K-5-500 - Manual

montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: [email protected]
PCI - Short Pulse Generator 10 kV
This generator is used to measure the performance of points of entry and of protective devices
according to MIL-STD188-125-1/2 (PCI: pulse current injection). It produces double exponential
current pulses of short duration. As an alternative to the 80 kV / 1.2 kA generator, this
equipment allows the test of each wire of a cable bundle for which the total current of 5 kA is
split in each connection. An important advantage of this generator is the wide amplitude range
from less than 0.2 kV to 10 kV. It can be fully controlled by a computer through a RS232 and
USB interface. We also provide all the necessary accessories like current probes, coupling and
decoupling networks, fibre optic links, etc. The automation software is also proposed as an
option.
SPECIFICATIONS
Type EMP10K-5-500
Standard MIL-STD-188-125-1 and -2 / short pulse
Peak open circuit voltage typically ≤ 0.2 kV to ≥ 12 kV, positive only
Source impedance ≥ 60 ohm
Peak short circuit current ≥ 200A
Rise time of the current (short circuit) < 20 ns
Pulse length (FWHM) (short circuit) 500 - 550 ns
Charging time < 10 sec
Output connectors LEMO type FFA 3Y415
Interface RS 232 / USB
Power rating 85 - 264 V
ac
/ 50 - 60 Hz / 150 VA
Storage / working temperature 5 - 50 °C / 15 - 45 °C
Dimensions 56 x 19 x 45 cm (L x H x W)
Weight 15 kg