Atec Haefely-pim120 - Manual

PIM 120 / PCD 120
10/700us Test System
To test telecom systems the 10/700us impulse
also called telecom impulse is used. This impulse is
characterized by high energy and a relative fast rise
time.
The 10/700us test system includes with the
impulse module PIM 120 and the automatic coupling
network PCD 120. It is used to generate and
superimpose 10/700us impulses onto telecom and
other communication lines.
The PCD 120 as part of the PSURGE 8000 system is
tailored to meet the ITU and IEC requirements for 2 &
4 wire interfaces. It allows the selection of both the
required resistors and coupling elements and to
perform a fully automatic test sequence.
Safety is paramount with surge impulses. The
PIM 120 High Voltage connections are all linked into
the System Safety Concept which prevents high
voltage plugs or cables from exposing operators to
potentially lethal voltages. The PCD 120 has special
HV output sockets to guarantee maximum safety for
the user.
PSURGE 8000 Surge Platform provides all the
programming functions required to perform IEC, ITU
and testing without the need of a control computer.
Voltage and Current peak measurement circuits
are used to help determine EUT PASS/FAIL criteria.
The integration in the WinFEAT&R control and
reporting software package enhances an efficient
set-up and operation of this test system. Most
importantly, the test load can be transferred to a
computer freeing valuable resources.
Features
10/700us impulse shape up to 7.4kV
according to ITU K.44
Fully automatic coupling network
Current limit resistors 25 Ohm, 50 Ohm,
75 Ohm and 100 Ohm
Coupling elements user changeable, gas
arrestor 90V are standard
Selected resistors and coupling elements
clearly shown on the PCD 120 front panel
WinFEAT&R software integrated
Benefits
International application – Specifically
designed to meet and exceed the requirements of
ITU and IEC / EN and tests for telecom and data
line applications.
Safe and Easy - The interlocked HV section and
the special HV sockets allow your operators to test
safely and easily.
Sturdy and Reliable – Careful component
selection ensures that the PIM 120 and PCD 120
will continue to operate under the most strenuous
testing regime.
Report Generation - The test system can
automatically generate test reports without a
computer. Add WinFEAT&R control and reporting
software to collect and collate data in any format
you like.
Fully flexible solution - The PIM 120 connects
to an EUT via the PCD 120. Decoupling units are
also separate and can be selected according to
application.
Applications
Resistibility tests
ITU K.20, K.21 & K.45 Telecom Interfaces
EMC tests
IEC 61000-4-5 Data lines
Safety tests