Atec Haefely-ECOUPLER4 - Manual

Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
[email protected]
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
[email protected]
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. ECOUPLER4_2006-05-23.doc
ECOUPLER 4
Three-Phase Coupling / Decoupling Network for ECOMPACT 4
The new ECOUPLER 4 combines the best of all
worlds: Performance, flexibility, economy and the
famous Haefely quality and reliability.
The ECOUPLER 4 is an ultra-compact coupling and
decoupling network for burst and surge coupling onto
three-phase power lines.
ECOUPLER 4 can be controlled manually from its front
panel or automatically from the PC, using the EMV-
Check software enclosed with the ECOMPACT 4.
The ECOUPLER 4 is very simple to use, and therefore
even first time of infrequent users may operate the
unit quickly and easily.
The ECOUPLER 4 conforms to the recent editions of
the relevant IEC and EN basic standards for surge and
burst testing.
Features
Two different test impulses
Combination wave 1.2/50us - 8/20us up to
4.2kV
Burst 5/50ns up to 4.2kV
Benefits
Multi-purpose - Two basic immunity tests
combined in a single economical package for
maximum flexibility.
Quick and Simple - One touch operation and
simple automation of test routines streamlines the
test procedure.
Test Reporting - Included Windows software
automatically documents test parameters and results.
Application
Full compliance and Pre-Compliance testing to a wide
variety of transient immunity standards:
IEC 61000-4-4 Edition 1 & Edition 2
IEC 61000-4-5 Edition 1 & Edition 2
Technical Specifications
Control Power 100/115/230V 50/60Hz,
50VA Coupling Capacitors
Burst 5 x 33nF
EUT Mains voltage max. 440V rms phase to
phase, 250V DC Coupling modes
Burst Single path testing
Common mode testing
EUT Current per phase 16A continuous
25A short time Coupling elements for
Surge 18uF differential mode
9uF + 10 Ohm common mode
Dimensions (W x H x D) 48 x 18 x 44 cm Coupling modes for Surge all combinations as required by
IEC 61000-4-5
Weight approx. 27kg Decoupling inductors 1.5mH
Ordering Information
ECOUPLER 4 Art. No. 249101
Including user manual and all cables required