Atec Pacific-Power-AMX Series - Manual

Standard Features:
• Master/Slave Operation of 2 to 5 AMX AC
Power Sources provides AC Power Levels to
from 8KVA up to 30KVA
• Advanced Linear Amplifiers Provide Very Low
Voltage Distortion, No Switching Noise, Fast
Voltage and Current Slew Rates, Exceptionally
Low Output Impedance and High Peak
Current Capability
• 1, 2, or 3 Phase Output Form Selectable from
Front Panel or Bus Command
• 20 to 5,000 Hz. Operation – 5Hz to 50KHz small
signal bandwidth, 3dB at 10% of Full Voltage
• Precision Voltage Programming – 0.05% with
Continuous Self-Calibration (CSC) engaged
• True-RMS Metering of Volts, Amps, and Power
• GPIB (IEEE-488.2) or RS-232 Interface
• Waveform Library – Arbitrary Waveform
Generator
• 99 Programs with Associated Transients for
Static and Dynamic Test Applications
• UPC Studio Software Suite
Available Options:
• T-Versions Include Transformer Assembly for
Higher Voltage Ranges
• Fully Installed and Wired in Industrial Strength
Instrument Cabinet with Caster Base
• Programmable Output Impedance
• Harmonic Analysis and Waveform Synthesis
• UPC Test Manager Software Application
• IEC Test Sequence Available for IEC 61000-
4-11, -4-13, -4-14, -4-27, -4-28 and -4-34 AC
Immunity Testing
UPC Manager Software Suite
Master the Power of the Wave!
UPC Manager Software
gives you the tools neces-
sary to quickly and easily op-
erate your AC Power Source.
With our graphical interface
control all areas of your
AC Power Source testing
with simple presets, user
prompts, test sequences,
test plans and custom
reports..
AMX Power Systems
FREQUENCY CONVERSION R & D MANUFACTURING AEROSPACE MILITARY CUSTOM
Parallel AMX AC Power Systems
T H E P O W E R O F E X P E R T I S E
8kVA to 30kVA
20-5,000 Hz
These special version AMX units are designed to easily parallel in a master slave
configuration to allow high power cabinet systems to be created ranging from 8kVA
to 30kVA. Either 4.5KVA or 6KVA AMX/AMXT units are used as building blocks for these
power racks.
An early pioneer in the development solid-state power conversion equipment, Pacific
Power Source continues to develop, manufacture, and market both linear and high-
performance PWM AC Power Sources. Pacific Power Source’s reputation as a market
and technology leader is best demonstrated by its continuing investments in both
research and development and world-wide customer support. With corporate owned
offices in the United States, France, the United Kingdom, and China, local personalized
support is always available.
1Ш4
2Ш4
3Ш4
0-338V
L-N
0-600V
L-L
0-338V
L-N
/585V
L-L
The versatility of the Master/Slave Paralleling option provided by the
140/160/345/360AMX and 140/160/345/360AMXT AC Power Sources provide the
operator with a wide variety of options using a building block approach to higher
capacity linear AC Power Source systems. Each parallelable group of AC Power
Sources requires at least one ‘Master’ (/MST) unit with either UPC-12 or UPC-32
controller and one or more “Slave” (/SLV) units. Any /MST unit can be used as a /
SLV with another /MST unit by setting a rear panel mounted switch. This feature
provides great flexibility for reconfiguring multiple units into a larger power sys-
tem as demanded by changing application requirements.
As a member of Pacific's AMX-Series popular family of high performance Linear
AC Power Sources, these AMX systems offer the same absence of output switching
noise and very low voltage distortion, ease of installation, and high AC waveform
fidelity as found in Pacific's single chassis Linear AC Power Sources.
Parallelable AMX Models
The Leader in AC Power Technology