Atec Haefely-PIM800-PIM810-PCD800 - Manual

PIM 800 / PIM 810 / PCD 800
Surge test system for telecom equipment according TIA-968-A (formerly FCC part 68)
TIA-968-A relates to the testing of Terminal
equipment connected at both residential and
commercial premises. The demarcation point
between telephone company network and
subscriber network determines if TIA-968-A should
be used or if another standard may be more
appropriate. It applies equally to voice-band
analog, Public Switched Digital Services and ISDN
Basic Rate Access or Primary Rate Access systems.
Testing is required at both telecom port and
power ports. Section 4.2 of TIA-968-A refers
specifically to surge impulse tests. Terminal
equipment can be telephones, fax machines,
modems, voice mail systems, etc.
Testing is required with equipment in their normal
working state. Surges must be applied to the Tip
and Ring connections in both metallic and
longitudinal modes, and differentially to power line
phases.
PSURGE 8000 Surge Platform can perform all the
programming functions required to perform IEC,
ITU and testing without the need of a control
computer. Voltage and Current peak
measurement circuits are used to help
determine EUT PASS/FAIL criterion. The
integration into the WinFEAT&R control and
reporting software package enhances an
efficient set-up and operation of this test system.
Most importantly, the test load can be transferred
to a computer, minimising the need for additional
resources.
Careful component selection ensures that the whole
test system will continue to operate under the
most strenuous testing conditions.
Features
Full hybrid waveforms according to the latest
issue of TIA-968-A
Telecom line surges type A and B
Power line surges
Integrated Tip and Ring coupling for 2 and 4
wire telecom systems
Integrated automatic power line coupling
4 wire telecom adaptors to RJ11, RJ12, RJ45
available
WinFEAT&R software integrated
Benefits
Safe and Easy - The interlocked HV section and the
special HV sockets allows your operators to test
safely and easily.
Automatic Coupling - Single connect system
speeds up the test process. Automatic coupling units
for single and three phase power lines as well as 4
wire telecom applications enable routing of impulses
to multiple EUT ports without changing test
configurations.
Automatic Report Generation - The test system
can automatically generate test reports without a
computer. Add WinFEAT&R control and reporting
software to collect and collate data in any format you
need.
No Overtesting – Surge voltage and current wave
shapes has narrow tolerance band. This ensures that
the EUT is not overtested. EUT overtesting may result
in extensive, unnecessary costs for product design
and manufacturing cost.
Applications
Telecom equipment
Single and three phase power ports
2 wire symmetrical Telecom lines
4 wire symmetrical Telecom lines