Atec FW-Bell-8010 - Manual

Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Power
Conversion
Power
Generation
Sensors
Hall effect gaussmeters
Gauss/Tesla meter
Model 8010
(Picture of Model 8030 for illustration only)
For more than 60 years, F.W. Bell
has been recognized for
leadership in Gauss Meters.
Today, F.W. Bell is building on that
heritage with our new sixth
generation of single, Model 8010
and three channel, Model 8030
Gauss Meters.
Key features
• TFT Color LCD Display with
Backlighting
• WVGA, 600 x 480 pixels
• Over 40 standard probes
available
• Automatic probe coefficient
correction
• Displays in Gauss, Tesla,
amp/meter or Oe
• Relative mode
• Fully menu-driven for easy
operation
• Auto zero and auto
calibration
• IEEE-488, RS-232, Ethernet RJ-
45 and USB interface
• CE-compliant
• Manufactured to IS0 9000
standards
• Comprehensive technical
support
The Model 8010 single-channel GAUSS TESLA METER from F. W. Bell leads the way for
advanced Hall Effect magnetic measuring technology. The easy-to-use front panel
programming feature incorporates the latest in user control operations. And the 8010 is
capable of measuring and displaying seven different parameters, including flux density,
frequency, temperature, min, max, peak and valley.
This high accuracy instrument is fully equipped to meet most magnetic measuring
applications. Bell's dynamic probe correcting software increases the 8010 measurement
capabilities to make it the most versatile magnetic measuring tool in the world.
Key features include high-resolution, high-accuracy and high-speed with a large TFT color
LCD display with backlighting. The 8000 features 50 kHz frequency response, temperature
and frequency measurements, auto zero, auto range, hold functions for peak, valley, min
and max, corrected and uncorrected outputs. The Model 8010 provides the user with
gauss, tesla, Oe, A/m, IEEE-488, RS-232 , Ethernet RJ-45 and USB communications ports and
classifier output.
The 8010 operates with Bell's sixth generation Hall effect probes. These probes provide
temperature compensation and measurement readings (0°C to +70°C) while monitoring
the magnetic field. The easy-to-read TFT Color LCD with Backlighting is easily viewable in
most light conditions and can be customized to meet a user's specific needs. Applications
range from basic magnetic measuring to sensitive complicated three-axis vector summing
requirements. The F.W. Bell Model 8010 is fully CE-compliant.