Atec FW-Bell-8030 - Manual (Page 2)

Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Power
Conversion
Power
Generation
Sensors
Hall effect gaussmeters
Gauss/Tesla meter
Model 8030
Specifications
Ranges
*Low field probe
† High field probe 300mG (30µT)* 3kG(300mT)
3G (300µT)* 30kG (3T)
30G (3mT) 300kG(30T)†
300G (3OmT)
Resolution 1 µ G (0.1nT) to 1G (0.1mT) {Dependent on Probe
Type Used}
Accuracy
(Displayed reading) DC basic
AC basic ±0.05% of reading
±2% of reading
Frequency range
DC mode
AC mode dc to 250Hz
10Hz to 50kHz
Accuracy
(Corrected analog output) DC basic
AC basic
Frequency range ±0.1% of range
±2% of range
dc to 500Hz
Frequency range
(Uncorrected analog output) DC mode
AC mode dc to 100Hz
20Hz to 50kHz
Analog output
Output voltage
Source impedance
Connector ±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V
<100 ohms
Standard female BNC
Additional influences Temperature
coefficient ±(0.02% of reading ±1 count)/°C
Temperature range
Operating
Storage 0°C to +50°C
-20°C to +60°C
Front panel display WVGA, 600 x 480 pixels, TFT Color LCD Display with
Backlighting. (6.5" diagonal viewing area)
Communication ports
RS-232
Baud rate
IEEE-488
Protocol
Protocol
Ethernet
USB Standard 9-pin female "D" connector
300,600,1200,2400,4800,9600,19200,38400,
57600,115200 bits/sec
Standard 24-pin GPIB connector Protocol
IEEE-1987.2 and SCPI-1999
IEEE-802.3u Data Link Layer & TCP/IP Transport &
Network Layer
Standard RJ-45 connector
Version 1.1 full speed
Power Volts: 100/120 or 220/240
Frequency: 50-60 Hz or 50-60 Hz
Current: 1.O A (max) or 0.5 A (max)
Size
Width
Height
Depth 11.5” (292mm)
5.2” (132mm)
14.5” (368mm)
Weight
Net
Shipping 11.5lbs (5.3kg)
17.7 lbs (8.1kg)
Contact
Pacific Scientific-OECO
4607 SE International Way
Milwaukie, OR 97222
1 (503) 659-5999
www.oeco.com