Atec Panametrics-35DL - Manual (Page 5)

NOW YOU CAN SEE THE
LIVE WAVEFORM AND MAKE
ADJUSTMENTS
An optional Live Waveform Mode on
all models permits the user to view the
ultrasound waveform (or A-scan) directly
on the gage’s display to make sure the
thickness reading is correct. The Adjust
Mode feature facilitates transducer setup
adjustments to maximize measurement
performance for challenging applications.
• High pixel density LCD renders sharp
trace of live waveform
• Permits real-time verification of
thickness readings
• Helps solve many difficult applications
• A Range, Delay, or Zoom allow
enlarging and centering to any section
of the waveform
• Permits adjustments of transducer
setup parameters
• Stores waveforms in data logger and
transfers to PC
35PCSCOPE
Optional 35PCSCOPE interface
software permits the instant display of
live ultrasonic waveforms and thickness
readings directly on your computer
screen. This is helpful when setup
parameters require closer examination.
Thickness and waveform of a very thin (0.004 inch
or 0.10 mm) sheet of steel.
to difficult applications...
Ultrasonic measurements are accurate, reliable, and
repeatable. Instant digital readings can be achieved by
transmitting sound into just one side of a material, making
it unnecessary to cut or destroy parts where the opposite
side is difficult to reach and where micrometers or other
inspection tools cannot do the job.
Why ultrasonics?
An optional protective rubber
boot protects the gage.