Atec Fluke-39-41B User Manual

Features, Three views of each reading, Safety conformance

Advertising
background image

The Model 39 Power Meter and 41B
Harmonics Analyzer combine the ease of

use of a digital multimeter, the visual
feedback of an oscilloscope and the

power of a harmonics analyzer in a
single instrument. If you're testing power
on three-phase systems or trouble-
shooting harmonics on non-linear loads,
no test tool makes it easier.

The Model 41B is ideal for further

analyzing data and optimizing system
performance. Use the Model 41B'$
FlukeView

software (included) to

download acquired data to a printer or
an MS-DOS or Windows

compatible

computer for analysis and presentation.

Three Views of each reading:

• Waveform
• Bargraph showing harmonic levels

Numeric values

a Real-time display updates. Display

updates three times per second,
providing a dynamic view of actual
circuit conditions
Comprehensive measurements.
Measure rms, peak and total harmonic
distortion (THD( for complex voltages
and currents - with no manual
calculations required.

„a

Three-Phase readings

From a simple single-phase
measurement, automatically calculates
three-phase power and power factor
for three-wire balanced loads,

System Critical Data Immediate

readings of Power Factors, KVAR,
Crest Factor, K-Factor

• Display Harmonics individually to

the 31 st

• Min/Max and Average recording
• Data Storage of up to eight complete

measurement sets (Fluke 41B)

*On-line Data Logging with connection to

laptop computer (Fluke 41B(

Safety Conformance

Independently tested and approved
for CSA C22.2 No. 1010-1, TUV to
EN61010 and UL3111 listing. Protected
to IEC 61010-1 Category III 600V

Features

Direct 30 power readouts from simple single-phase measurement

i

True-rms voltage from 5.OV to 600V

True-rms current from 1A to SODA (1000A with optional probe}

Peak, DC. and Crest Factor

Total harmonic distortion (%THDF and %THDR)

Active power from IOW to 3OOkW (6OOkW with optional probe}

Apparent power (VA) & Reactive Power (VAR)

Total Power factor (PF)

Displacement Power Factor (DPF)

K-factor

Frequency from 6Hz - 99.9Hz (fundamental)

Harmonics to 31st

Phase angle of fundamental and harmonics

Waveform, text and spectrum displays

Record mode - MIN. MAX and AVG

Zoom mode on harmonics bargraphs

46

0

Memory for 8 complete data sets

Data Logging

Optically isolated RS-232 interface

FfukeView PC software for Windows and DOS included

Advertising