Atec LeCroy-Wavesurfer-MXs-B Series - Manual (Page 3)

3
EssEntial tools for ValiDation anD DEbug
Embedded Controller
Design and Debug
Save time when working with
embedded controllers by adding
high-performance mixed signal
capability with the MSO MXs-B.
Capture digital signals up to 250 MHz
with up to 10 Mpts/Ch memory,
1 GS/s and 18 channels. Quickly and
easily isolate specific serial data
events with optional I
2 C, SPI, UART,
RS-232, USB 1.0/1.1/2.0, USB 2.0-
HSIC, Audio (I
2 S, LJ, RJ, TDM), MIL-
STD-1553, ARINC 429, MIPI D-PHY,
DigRF, CAN, LIN and FlexRay™ trigger
and decode options.
labnotebook Documentation
and report generation tool
LabNotebook provides a report
generation tool to save and
document all your work. Saving
all displayed waveforms, settings,
and screen images is all done
through LabNotebook, eliminating
the need to navigate multiple menus
to save all these files independently.
advanced Math and Measure
With 18 math functions including
averaging, enhanced resolution and
FFT plus 23 measurement parameters
WaveSurfer can measure and
analyze every aspect of a waveform.
Beyond just measuring waveforms,
WaveSurfer provides statistics and
histicons to show how waveforms
change over time.
Wavestream fast
Viewing Mode
WaveStream provides a vibrant,
intensity graded (256 levels) display
with a fast update to closely simulate
the look and feel of an analog
oscilloscope. Turn WaveStream ON
or OFF, and adjust intensity, using
the front panel knob. Use it only
when you want to.
Wavescan advanced search
WaveScan allows searching in a
single acquisition using more than
20 different criteria. Or, set up a
Scan condition and scan for an
event over hours or even days.
When using an MSO model
WaveScan will search digital lines
for parallel bus patterns.
touch screen simplicity
Keep your testing efficient with a
thoughtfully designed user interface
that provides the busy engineer with
a GUI that is smooth, transparent, and
easy to use. Use the touch screen
to quickly access all triggers, math
functions and measurement parameters
or to “draw a box” around the area
of interest and zoom all channels to
the desired area.