Atec Pacific-Power-3120ASX - Manual

Model 3120-ASX
12kVA – High Performance AC Power Source
Single, Split, or Three Phase Frequency Converter
The Model 3120-ASX is Pacific’s latest addition to its line of Manual
and Programmable AC Power Sources. Power Conversion within the
ASX Series is achieved by high frequency pulse width modulation,
resulting in cool, quiet and efficient operation.
The 3120-ASX is ideal for AC test, frequency conversion,
laboratory and bench-power applications.
AC TEST POWER
The 3120ASX is equipped with the UPC Programmable Controller,
a powerful micro-controller used to create a fully integrated test
system. It supplies a variety of power conditions to the device under
test and meters/analyzes all output performance parameters.
FREQUENCY/VOLTAGE CONVERSION
The 3120-ASX is an excellent source of stable AC Voltage over
the frequency range of 15 to 1,200Hz. The output frequency is
quartz-crystal stabilized. Output voltages up to 600V are available.
PHASE CONVERSION
With the ability to provide single and three-phase outputs, the
3120ASX is the perfect choice to provide three-phase input to split (two-phase) or single-phase output power conversion.
UPC SERIES CONTROLLER
The latest additions to Pacific’s family of UPC Controllers are the UPC-3M and UPC-3. The UPC Controller is a modular
component of the ASX Series and is available in either Manual or Programmable Configurations.
All UPC Controllers include precise metering functions with data displayed via a 160-character LCD display.
This, along with the 30-key front panel, provides the industry’s most powerful and user-friendly controller.
The UPC-3 is available with either RS-232 or GPIB remote interface. Commands are structured in accordance with SCPI
(Standard Commands for Programmable Instruments). The RS-232 serial port operates up to 38.4kBps. The GPIB interface
is compatible with the IEEE-488.2.
Standard FEATURES of each system include:
• 22 Waveform Library – Arbitrary Waveform Generator
• 15 to 1,200Hz Operation – 5,000 Hz Small Signal Bandwidth
• Precision Voltage Programming – 0.05% with
Continuous Self-Calibration (CSC) engaged
• Precision True-RMS metering of volts, amps, and power
for displays and reporting
• RS-232 interface with SCPI
• 1 phase/3 phase Switch Selectable Output from front
panel or bus command
• 99 steady state programs with associated transients
for static and dynamic test applications Available Options with each system include:
GPIB (IEEE-488.2) Interface with SCPI •
Programmable Output Impedance •
Harmonic Analysis (FFT) and Waveform Synthesis •
Peak Inrush Capture and Waveform Analysis •
LabVIEW for Windows • ™ and LabWindows ™
Instrument Drivers
UPC Manager Software Suite
•
Wide range of Output Magnetics for worldwide testing •
17692 Fitch
Irvine, California, USA 92614
+1 800-854-2433
Tel: +1 949-251-1800
Fax: +1 949-756-0756