Atec Pacific-Power-115ASX-T - Manual

Models 115ASX-115ASXT
FREQUENCY CONVERSION R & D MANUFACTURING AEROSPACE MILITARY CUSTOM
1Ø – High Performance AC Power Source
T H E P O W E R O F E X P E R T I S E
Model 115ASX
As a member of Pacifi c's ASX-Series family of high performance AC Power Sources,
the 115ASX off ers the low acoustic noise, ease of installation, and maximum power
density found in all of Pacifi c's high frequency, pulse width modulated AC Power
Sources. Control and operational features provide a high degree of versatility and
ease for applications ranging from simple, manually controlled frequency conversion
to harmonic testing and sophisticated bus programmable transient simulation.
AC TEST POWER
The 115ASX is equipped with a powerful micro-controller with the ability to
operate as a fully integrated test system. It supplies a variety of power conditions
and transients to the device under test while metering and analyzing all output
performance parameters.
FREQUENCY/ VOLTAGE CONVERSION
The 115ASX is an excellent source of stable AC Voltage over the frequency range of
15 to 1,200 Hz. The output frequency is quartz-crystal stabilized. Output voltages
up to 132VL-L are available on the 115ASX model and up to 330VL-L on the
115ASXT model.
UPC SERIES CONTROLLER
Three controller models are available off ering both manual and programmable
control. All controllers provide manual operation from the front panel.
Programmable Controllers may be operated from the front panel or from a remote
interface via RS 232 or GPIB.
The Leader in AC Power Technology
An early pioneer in the development solid-state power conversion equipment,
Pacifi c Power Source continues to develop, manufacture, and market both linear
and high-performance PWM AC Power Sources. Pacifi c's reputation as a market
and technology leader is best demonstrated by its continuing investments in both
research and development and world-wide customer support. With corporate
owned offi
ces in the United States, France, the United Kingdom, and China, local
personalized support is always available.
Standard Features:
• Single phase output from front panel or bus
command.
• 15 to 1,200 Hz. Operation – 5,000 Hz small
signal bandwidth.
• Precision Voltage Programming – 0.05%
with Continuous Self-Calibration (CSC)
engaged.
• True-RMS metering of volts, amps, and
power.
• GPIB (IEEE-488.2) or RS-232 Interface.
• Waveform Library – Arbitrary Waveform
Generator.
• 99 stored programs with associated
transients for static and dynamic test
applications.
• UPC Studio Software Suite.
• UPC Interactive LabVIEW TM Libraries.
Available Options:
• T versions include internal transformers for
higher voltage ranges
• Rack enclosures with caster base
• Programmable Output Impedance
• Harmonic Analysis and Waveform Synthesis
• Peak Inrush Capture and Waveform Analysis
• UPC Test Manager Software Application
UPC Manager Software Suite
Master the Power of the Wave!
UPC Manager Software gives you the tools
necessary to quickly and easily operate your AC
Power Source. With our graphical interface con-
trol all areas of your
AC Power Source
testing with simple
presets, user prompts,
test sequences, test
plans and custom
reports.
1,500VA
15-1,200 Hz
1Ø
 0-132V
L-N