Atec Ophir-5263FE User Manual

Model 5263, Solid state broadband high power rf amplifier

Advertising
background image

MODEL 5263

0.7 - 4.2 GHz

60 WATTS

LINEAR POWER RF AMPLIFIER

5300 Beethoven Street, Los Angeles, CA 90066

TEL: (310)306-5556 FAX: (310)821-7413

WEB: www.ophirrf.com E-MAIL: [email protected]

Parameter

Specification @ 25° C

Electrical

1

Frequency Range

0.7 – 4.2 GHz

2

Saturated Output Power

60 Watts Typical

3

Power Output @ 1dB Comp.

40 Watts Minimum

4

Small Signal Gain

+49 dB min

5

Small Signal Gain Flatness

+ 3.0 dB max

6

IP

3

+56 dBm typical

7

Input VSWR

2:1 max

8

Harmonics

-20 dBc typical @ 45 Watts

9

Spurious Signals

< -60 dBc typical @ 45 Watts

10

Input/Output Impedance

50 Ohms nominal

11

AC Input Power

1000 Watts max

12

AC Input

100 – 240 VAC, single phase

13

RF Input

+10 dBm max

14

RF Input Signal Format

CW/AM/FM/PM/Pulse

15

Class of Operation

A

Mechanical

16

Dimensions

19” x 5.25” x 20”

17

Weight

43 Lbs

18

Connectors

Type-N

19

Grounding

Chassis

20

Cooling

Internal Forced Air

Environmental

21

Operating Temperature

0º C to +50º C

22

Operating Humidity

95% Non-condensing

23

Operating Altitude

Up to 10,000’ Above Sea Level

24

Shock and Vibration

Normal Truck Transport

Solid State

Broadband High

Power RF Amplifier

The 5263 is a 60 Watt
broadband amplifier that
covers the 0.7 – 4.2 GHz
frequency range. This small
and lightweight amplifier
utilizes Class A linear power
devices that provide an
excellent 3

rd

order intercept

point, high gain, and a wide
dynamic range.

Due to robust engineering
and employment of the most
advanced devices and
components, this amplifier
achieves high efficiency
operation with proven
reliability. Like all OPHIR

RF

amplifiers, the 5263 comes
with an extended multiyear
warranty.

Specifications subject to change without notice

08/12

Approved By: ________________________________________________ Date: _____________________

◊ RE

-

Rear RF Connector model with Front Panel
Controller Ethernet, IEEE-488 and RS232

◊ FE

-

Front RF Connector model with Front Panel
Controller Ethernet, IEEE-488 and RS232

◊ R

-

Rear RF Connector model

◊ F

-

Front RF Connector model

ORDERING MODELS

FE Model Shown

Advertising