Atec Noise-Com-NC7108 User Manual
Atec Equipment
Advertising
NOISE COM, INC.
II.
SPECIFICATIONS
2-1
INSTRUMENT SPECIFICATIONS
Frequency Range 100 Hz - 500 MHz
Output Power 10 Mw
Output impedance 50 Ohms.
Input voltage 115 Volts 60Hz (100 & 230V 50Hz Optional).
Noise output is white gaussian noise with a qualified peak
factor.
Control by means of front panel or remotely by means of a
controller via IEEE (GPIB), RS-232, RS-422 or RS-423.
Advertising