Atec Rohde-Schwarz-DS360 - Manual

· 1 mHz to 200 kHz frequency range
· <
−
100 dBc distortion (to 20 kHz)
· Sine, square, white and pink noise
· 20
µµ
Vpp to 40 Vpp output range
· Linear and log frequency sweeps
· 25 ppm frequency accuracy
· SPDIF/EIAJ and AES-EBU outputs
· Balanced and unbalanced outputs
· RS-232 and GPIB interfaces
· DS360 ... $2595
(U.S. list)
Stanford Research Systems phone: (408)744-9040
www.thinkSRS.com
The performance of a low-distortion analog source and the
precision of direct digital synthesis (DDS) is combined in the
DS360. With less than 0.001 % total harmonic distortion (THD),
25 ppm frequency accuracy and a broad range of features
including standard waveforms, sweeps and bursts, the DS360
is the ideal source for audio frequency applications.
Ultra-Low Distortion and Noise
Unlike conventional RC oscillators, the DS360 uses digital
signal processing and a precision 20-bit D/A converter to
provide better than
− 100 dB distortion over the audio
frequency range. With its DDS architecture, the DS360 has
the features and flexibility of a contemporary synthesized
function generator. Every effort has been made to keep the
DS360 as quiet as possible. Careful shielding and board layout
keep the output noise to a minimum, making the DS360 the
instrument of choice for audio research and development,
manufacturing and automated testing.
Frequency Stability
Low-distortion analog sources have impressive THD
specifications, but poor frequency accuracy and resolution.
The DS360 delivers 0.0025 % frequency accuracy over its
entire frequency range. It has 6-digit frequency resolution
from 1 mHz to 200 kHz and a steady 25 ppm frequency
stability. You can actually dial in 123,456 Hz from the front
panel and have it mean something!
DS360 Function Generator
Synthesized Function Generators
DS360  Ultra-low distortion function generator