Atec MB-Dynamics-MB1000VI - Manual

TECHNOLOGY · TEST PROCESSES · ENGINEERING SERVICES DATA SHEET
SPECIFICATIONS MB500VI MB1000VI
Frequency Range DC‐20,000 Hz, ‐3 dB, useable to
60kHz at reduced output power DC‐20,000 Hz, ‐3 dB, useable to
60kHz at reduced output power
Input Coupling AC or DC AC or DC
Feedback Mode Voltage or Current, switchable
with external toggle switch Voltage or Current, switchable
with external toggle switch
Input Impedance >10kΩ >10kΩ
Input Power Requirements 100 ‐‐ 240 VAC; 48‐62 Hz 100 – 240 VAC; 48/62 Hz
Input Power Required 1,000 VA (max) 2,000 VA (max)
Max. Output Volts 25 V RMS 45 V RMS
Max. Output Amps 25 A RMS (35 A Pk) 25 A RMS (35 A Pk)
Over Current & Voltage
Protection User‐adjustable trips and clipping User‐adjustable trips and clipping
Over Temperature Protection Yes Yes
Ethernet Amplifier
and Remote Shutdown See Options on following pages See Options on following pages
Shaker Cooling & Overtravel See Options on following pages See Options on following pages
Current Measurement BNC, 250 mV/A; front panel LCD BNC, 250 mV/A; front panel LCD
Total Harmonic Distortion 0.5% @ 100 Hz / 10 V RMS 0.5% @ 100 Hz / 10 V RMS
Dimensions (rack mount) 3 ½” H (2HE); 19” W (482 mm);
14 ¼” D (362 mm) 7” H (4HE); 19” W (482 mm);
14 ¼” D (362 mm)
Signal In for Full Power Out ± 3 V pk (Factory)
(Int. switch:
± 1, 3, 5, 10 Vpk)
± 3 V pk (Factory)
(Int. switch:
± 1, 3, 5, 10 Vpk)
Signal‐to‐Noise Ratio >100dB >100dB
Weight or Mass 33 lbs (15 kg) 73 lbs (33 kg)
CE Mark Yes Yes
Application Note (Manual) Yes Yes
Specifications subject to change without notice
MB500VI and MB1000VI
Power Amplifiers
Specifications and Options