Atec Vitrek-930i - Manual

Speed, Flexibility & Value
At Vitrek, we believe that your investment
in safety compliance equipment is an
important one. The 930i Ground Integrity
Analyzer is a case in point. The output
current is fully user selectable from 3 to
30 amperes. So whether you’re testing to
a UL spec at 25 amps today or an IEC
spec at 30 amps tomorrow, you can be
sure that your Vitrek will stand up to the
test for years to come.
In fact, all test parameters of the 930i are
fully programmable-output current,
frequency, resistance limits and test
duration. And whether you’re running the
930i from its password protected test
database or via computer control, ground
bond testing has never been simpler or faster.
Measurement Confidence
That is Second to None
To provide unparalleled accuracy, the
Vitrek 930i employs a state of the art high
speed, 4-channel, 16 bit analog to digital
converter. The 930i simultaneously tracks
and controls the output current, while
measuring voltage drop across the load,
and monitoring the status of both power
supply and output amplifier.
The four-wire Kelvin configuration elimi-
nates lead resistance errors to provide
measurement repeatability down to 10µ
Ω
.
Performance that the other units cannot
begin to match.
Seamless Test Integration
The 930i works hand-in-hand with Vitrek
hipot testers so that dielectric testing and
ground bond testing can be accomplished
from a single set up. The results are
automatically integrated into a unified test
report with overall pass/fail status as well
as step-by-step results with final values.
Providing confidence in every test you
make is our job. Isn’t it time to put the
unrivaled performance of the 930i to
work for your team?
The Ultimate in Ground
Bond Analyzer Performance
• 3 to 30 amp test current - meets a wide
variety of regulatory test specifications
• Password protected test routine storage
• Frequency synthesis 50-400Hz
• 10µ Ω resolution - more measurement
confidence and repeatability
• 4-wire Kelvin sensing - eliminates lead
resistance errors
• Fully programmable via front panel,
hipot or computer control
• Hipot and ground test from one set-up
• High speed test throughout with actual
measurement values
• Display prompted setup - easy to use,
fully adjustable
• CE mark certified to EN 61010
• Made in the U.S.A.
• 5 Year extended warranty
Speed, Flexibility & Value
Measurement Confidence
That is Second to None
Seamless Test Integration
W O R L D L E A D E R S I N C O M P L I A N C E A U T O M A T I O N
S M