Atec Tinius-Olsen-H1KS - Manual (Page 5)

5
Fig 24. A 3 point bend test being
performed with model HF72 flexural
jig on plastic sample
Fig 22. Testing strength of crimped
connections using HT20 grips
Fig 30. Testing the puncture
resistance of work gloves
Fig 31. Testing the extraction forces
of new material for wine bottle corks
Fig 29. Tinius Olsen high travel
extensometer, model 100RC
Fig 32. Tear test on rubber specimens Fig 28. Testing webbing material
using S453 grips
Fig 26. Model H10kS shown with an
environmental chamber for testing at
elevated or reduced temperatures; note
the use of a laser extensometer that
can be used with the chamber to
determine the elongation of the sample
Fig 27. Compression test on crash
helmet
Fig 23. Dumbbell sample of sheet
metal being tested with HW21 grips
Fig 25. Reinforced plastic dumbbell
samples