Atec Tenney-BTC-BTRC - Manual

Benchmaster Temperature-Humidity
Test Chamber
Tenney's Benchmaster temperature and humidity test chambers are capable of simulating a wide range of temperature
or temperature and humidity conditions. The five cubic foot work space will readily accept equipment as large as a 19"
relay rack.
In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact
exterior that maximizes the interior workspace.
Benchmaster Temperature-Humidity
Standard Features:
• Vapor-tight interior liners made of 100% continuously welded
stainless steel
• Temperature and humidity environmental chambers with humidity
capabilities are constructed of 100% non-corroding parts and have
a low-water protection system
• Uniform conditions are assured through the use of a vertical-down
recirculating conditioning stream
• VersaTenn III Controller on Temperature and Humidity Chambers
• Watlow F4 Controller on Temperature Only Chambers