Atec Tektronix-P7313SMA-P7380SMA - Manual

Differential SMA Probe Family
P7313SMA • P7380SMA Data Sheet
Features & Benefits
>13.0 GHz Bandwidth (P7313SMA only, typical)
>8.0 GHz Bandwidth (P7380SMA only, typical)
50 Ω Termination Network, Differential SMA Inputs
Industry-leading Differential Return Loss and VSWR
High-bandwidth Differential Amplifier with Excellent CMRR
Internal Termination Voltage Generator can be Controlled Internally by
the Oscilloscope*
1 , by an External Source, or Automatically by the Probe
Phase-matched SMA Cables (38 inch length, <1 ps skew)
with Cable Loss Compensation
Switchable Gain for Extended Dynamic Range
Auxiliary (Inverted) Output for use with Spectrum Analyzers, Network
Analyzers, or as a Clock Recovery Trigger Source
TekConnect™ Interface
Applications
Validation and Compliance Testing of Serial Data Standards including,
but not limited to:
PCI Express I and II
Serial ATA
FBDIMM
DDR
XAUI
HDMI/DVI (P7313SMA only)
Tektronix continues to demonstrate its proven leadership in differential
probing with a significant addition to our Differential SMA Probe Family.
Differential SMA probes are designed for measuring differential signals
in a 50 Ω signaling environment, providing the ability to convert from a
differential SMA signal path to a single oscilloscope input channel. Many
of today's high-speed serial data standards employ differential signaling
on multiple lanes that are challenging to measure simultaneously on a
single oscilloscope. The Tektronix Differential SMA Probes provide the
ability to measure a high-speed differential signal on each channel of a
multiple-channel oscilloscope. The right oscilloscope can simultaneously
acquire up to four high-speed differential signals with the use of four
differential SMA probes. As an added benefit, the SMA inputs on the probes
connect to high-quality 50 Ω terminations that offer industry-leading return
loss, a critical specification that is very important in compliance testing as
frequencies increase.
Tektronix Differential SMA Probes also provide a common mode DC voltage
input to the termination network. The termination voltage can be supplied
either externally by the user or internally by the oscilloscope. In addition,
there is also an automatic mode that senses the common mode voltage of
the input signal and automatically sets the termination voltage to match.
The P7313SMA has an extended termination voltage range that makes it
ideal for testing differential standards with high common mode voltages like
HDMI and DVI.
Taken together, the high-speed differential amplifier, superior 50 Ω
terminations, low return loss, flexible termination voltage, and quality
phase-matched SMA cables create a world-class differential acquisition
system when used with Tektronix oscilloscopes.
* 1 Not available on all oscilloscopes.