Atec Tektronix-TDS7154 - Manual

Features & Benefits
4 GHz, 2.5 GHz, 1.5 GHz,
1 GHz and 500 MHz
Bandwidth Models
Up to 20 GS/s Real-time
Sample Rate
Up to 32 Megasamples
Memory Depth
>400,000 Wfms/second
Maximum Waveform
Capture Rate
Optional Communications Mask
Testing Up to 2.5 Gb/s Rates
Optional Clock Recovery
from Serial Data Streams
Optional 32-bit Serial Trigger
for Isolation of Pattern-
dependent Effects
10 MHz Timebase Reference
Input for Enhanced Accuracy
and Repeatability
Graphical User Interface
Control via Classic Direct
Controls, Touch-sensitive Color
Display or Mouse Navigation
Open Microsoft Windows
Environment
Built-in Networking
Applications
Verification, Debug and
Characterization of
Sophisticated Designs
Design Development and
Compliance Testing of Serial
Data Streams Up to 2.5 Gb/s
Rates for Telecom and
Datacom Industry Standards
Debugging Telecom, Datacom
and Storage Area Network
Equipment Designs and High
Speed Backplanes
Signal Integrity, Jitter
and Timing Analysis
Spectral Analysis
Disk Drive Analysis
Investigation of Transient
Phenomena
D i g i t a l P h o s p h o r O s c i l l o s c o p e s
TDS7000 Series
Performance, Simplicity and
Connectivity
TDS7000 Series oscilloscopes are high per-
formance solutions for verification, debug and
characterization of sophisticated electronic
designs. The family features exceptional signal
acquisition performance, operational simplicity
and open connectivity to the design environ-
ment. Classic analog-style controls, a large
touch-sensitive display and graphical menus
provide intuitive control. Open access to the
Microsoft Windows operating system enables
unprecedented customization and extensibility.
Superior Performance
TDS7000 models range from 500 MHz to
4 GHz bandwidth with single-shot sample
rates to 20 GS/s, meeting demands of the lat-
est high speed logic families and multi-Gigabit
communication standards. Acquisition memory
options from 2 to 32 Megasamples maximize
the value of high sample rate and ensure that
critical events are captured with fine detail.
High performance jitter analysis to
1.5 ps RMS is achieved through exceptional
trigger and acquisition performance, deep
memory and applied software.
TDS7000 Series high bandwidth signal access
solutions include the P7240 4 GHz (120 ps
rise time) active probe and the P7330 3.5 GHz
(<130 ps rise time, typical, <140 ps guaran-
teed) differential probe. Small form-factors
and a wide array of tip accessories ensure
effectiveness. In addition, the TDS7404,
TDS7254 and TDS7154 include the
TekConnect ™ signal interconnect system. This
interface replaces traditional BNC input con-
nectors with a convenient positive-locking
interface suitable for higher system band-
widths. P7000 Series probes are directly com-
patible with TekConnect signal interconnect
system along with adapters that provide SMA,
BNC and N connections.
Digital Phosphor Oscilloscopes • www.tektronix.com/tds7000 1