Atec Yokogawa-cw240 - Manual

Characteristics 1
Electric power analysis and power
supply quality control in a single unit.
Characteristics 2
Spec Sheet CW240
Clamp-on Power Meter
2004.10.18 2nd (MC)
V Range : 150/300/600/1000Ｖ
A Range : Minimum 200.0mA（96036）
Maximum 3000A (96034/35)
Measuring Mode : All items can be measured at the same time
Instantaneous Value (Wave form) / Electric Energy /Demand / Harmonics / Voltage Fluctuation
Wiring : 1 phase 2W, 1 phase 3W, 1 phase 3W3i (Neutral line current)
3 phase 3W2i, 3 phase 3W3i (3-wattmeter method), 3 phase 4W,
3 phase 4W4i (Neutral line current)
Multiple System Load Measurement :
1 phase 2W X2/ X3/ X4, 1 phase 3W X2, 3 phase 3W X2,
SCOTT Wiring (1 phase 3W +3 phase 3W)
Data Saving : PC Card, Internal Memory (1MB)
Data Saving Interval :Standard 1/2/5/10/15/30 sec 1/2/5/10/15/30/60 min
Short time 1 Cycle/0.1/0.2/0.5 sec (Only for Instantaneous Value)
Function : Leak Current
Analog I/O
Wiring & Setting Check
Display Hard Copy, Instantaneous Value Data Saving