Atec Sorensen-HPD Series - Manual

858.458.0223 [email protected]
Sorensen HPD Series 300 W
• Low noise and ripple
• Excellent line/load regulation
• Constant voltage or constant current operation
with automatic crossover and mode indication
• Current limit
• Front and rear outputs
• Remote sense
• LabVIEW® and LabWindows® drivers
300 Watt DC Power Supply with Near-Linear Performance 15–60 V
5–20 A
115 230
The Sorensen High Power Density (HPD) Series
provides 300 watts of reliable DC power in a
quarter-rack wide unit. The HPD Series power
supplies are ideal for benchtop, ATE and OEM
applications where a wide adjustment of output
voltage or current is required in a compact unit. The HPD series uses switch-mode technology
combined with linear post regulation to provide
performance comparable to an all-linear design.
The HPD series features excellent line and load
regulation with low noise and good transient
response. The series is available in a single unit for
benchtop use. For systems applications, multiple
units can be rack-mounted in configurations of
up to four independent 300-watt outputs.
107
Distributed by:
www.SignalTestInc.com
1529 Santiago Ridge Way
San Diego, CA 92154 USA.
[email protected]