Atec Sorensen-DHP Series - Manual

858.458.0223 [email protected]
Sorensen DHP Series 5–20 kW
t
.PEVMBS
%FTJHO

5IF
TFSJFT
IBT
B
VOJRVF
NPEVMBS

design that results in two rackmount profiles ac-
cording to output power
t
&YUFSOBM
4IVUEPXO

"O
FYUFSOBM
TIVU
EPXO
UP
inhibit the output
t
4FRVFODJOH

1PXFS
BOE
BVUPTUFQ

sequence settings
t
1SPUFDUJPO

0WFSWPMUBHF

PWFSUFNQFSBUVSF


surge limit, soft start, brown out and short
circuit protection current limit fold back.
DC High Power Programmable Supplies 5–50 V
133–3000 A
208 400 480
The Sorensen DHP Series provides models ranging
in output power from 5 kW to 20 kW in a single
chassis. Programmable output voltages range
from 5V to 50 VDC, delivering up to 3,000
amperes. This family has two operational modes,
constant-voltage and constant-current. The DHP Series uses control technology
permits up to nine (9) steps per sequence
with a maximum sequence duration of up
to 27.75 hours.
This family has standard analog and a variety
of combinations of IEEE-488.2, RS-232 and/or
isolated analog input control interface options.
71