Maintenance and care – Indesit PI 604 User Manual

Page 13

Advertising
background image

GB

13

Switching the appliance off

Disconnect your appliance from the electricity supply
before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents, stain
removers, anti-rust products, powder detergents or
sponges with abrasive surfaces: these may scratch
the surface.

! Never use steam cleaners or pressure cleaners on
the appliance.

• It is usually enough to wash the hob with a damp

sponge and dry it with absorbent kitchen roll.

• The electric hobs should be cleaned using a damp

cloth and then rubbed with oil while still warm.

• Stainless steel may become marked if it comes into

contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time.
After cleaning, it is advisable to rinse thoroughly
and dry. It is also recommended that drops of water
be dried.

Maintenance and care

Assistance

Communicating:
• appliance model (Mod.)
• serial number (S/N)
This information is found on the data plate located on
the appliance and/or on the packaging.

Technical characteristic

DATA PLATE

Electrical section

voltage: 230V/400V 3N ~ 50/60Hz
Max power 7000 W

This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EEC of 12/12/06 (Low
Voltage) and subsequent
amendments;
- 2004/108/EEC of 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments;
- 93/68/EEC of 22/07/93 and
subsequent amendments.
- 2002/96/EC and subsequent
amendments.

Advertising