Avision AV1860 (DL-1101S/DL-1103S) User Manual
Page 115
9-4
Question:
Paper becomes skewed in the
scanner.
Answer:
1) Use the slide guide to keep the
paper path straight.
2) Check the condition of the feeding
roller. If necessary, follow the
cleaning directions in Section 5.1 and
perform the cleaning.
Question:
Why does my scanned image
always comes out too dark?
Answer:
1) Modify the Gamma setting to 1.8
for your monitor and, when printing,
set Gamma to 2.2 for your printer.
2) Use the Brightness setting of the
TWAIN user interface to get a brighter
image.
Question:
Sometimes it seems the scanner
does not detect paper?
Answer:
The scanner paper sensor is located at
the center of the paper guide. Please
place the document you need to scan
on the paper guide and use the slide
guides to keep the paper path straight.