Avision AV120 User Manual
Page 40
5-4
5.3 Replacing the Snap-in Pad Module
After scanning approximately 10,000 pages through the ADF, the pad
may be worn out and you may experience problems with document
feeding. In this case, it is highly recommended to replace the pad
module with a new one. For ordering the pad module, please consult
your nearest dealer and follow the procedure below to replace it.
Disassembling Procedure
1.
Gently open the ADF Front cover to the left.
2.
Press both arms of the ADF snap-in pad module inwardly with
your fingers to pull out the ADF snap-in pad module.
Assembling Procedure
1.
Take out the ADF pad module from the box.
2.
Press both arms of the ADF snap-in pad module inwardly with
your two fingers.
3.
Place it into the holes until it snaps into place.