Avision AV100III User Manual
Page 33
6-4
Question: The scanning speed of my scanner is much
slower than that of those installed at other
computers. Can I speed it up?
Answer: In such case, please
a) Set you PC printer port to the EPP mode from
BIOS setting, or,
b) Add Avision scanner interface card IF05 to
scan at a higher speed.
Question: Does it take long for the scanner to initialize?
Answer:
If your printer port supports SPP mode only, it
takes a minute or so for the scanner to initialize.
If your printer port supports EPP mode, the
initialization process is much faster, can be done
in about 20 seconds. Generally, it takes a two to
three minutes time for AV100III scanner lamp to
warm up. It may be that your scanner lamp is out
of order if it works otherwise.
Question: Sometimes it seems the scanner does not detect
paper?
Answer:
The AV100III scanner’s paper sensor is located
central of the paper guide. Please place whatever
you want to scan somewhere thereabout and use
the slide guides to keep the paper path straight.
Question: Why sometimes pass-through printing does not
work at all?
Answer:
It may be that you forgot to power on the
scanner. When doing pass-through printing, first