Avision AV320+ (FT-0702H) - Manual (Page 16)

User’s Manual
2-7
2.3.2 Turning on the Scanner
1. Press the Power Switch button on the front panel, the
Power LED will flash. When it is finished and ready to
scan, the LED indicator will stop flashing and become
steadily on. To turn off the scanner, press the Power
Switch button for about 3 seconds, the Power LED will
be off.
2.3.3 Installing the Scanner Driver
1. Place the supplied CD-ROM onto your CD-ROM drive.
2. The software installation graphic appears. If not, run
“setup.exe” .
Power Switch