Avision AV220C2 (300500003) - Manual (Page 85)

8. Maintenance
8.1 Cleaning the ADF
From time to time the pad assembly and feeding rollers may
become contaminated with ink, toner particles or paper
dust. In this case the scanner may not feed documents
smoothly. If this occurs please follow the cleaning
procedures to return your machine to its original state.
The Cleaning Procedures
1) Soak a cotton swab with some isopropyl alcohol. (95%).
2) Press the ADF Release button on the upper-left. Open the
front door slightly to the left. Wipe the upper feeding roller
by moving the swab from side to side. Rotate the roller
forward with your finger and repeat the cleaning steps
above until the entire roller is cleaned.
3) Wipe the ADF pad in one direction from top to bottom or
the other way around. Be careful not to damage the pick
springs.
4) Close the scanner front door. Your scanner is now ready
for use.
ADF Release
button
8-6