Avision AV610 - Manual (Page 39)

AV610 User’s Manual 39
Chapter 5 Care and Maintenance
5.1 Cleaning the ADF
Your scanner is designed to be maintenance-free.
However, it still needs to be cleaned occasionally to ensure optimum image
quality and performance. The scanner parts may be contaminated with ink,
toner particles or paper coatings. As a result, the scanner needs to be
cleaned occasionally particularly in the following cases:
1. Documents do not feed smoothly or easily;
2. Several documents feed at one time.
The Cleaning Procedures
1. Wet a cotton swab with some isopropyl alcohol. (95%)
2. Open the ADF unit and wipe the upper feeding roller by moving the
swab from side to side. Rotate the roller forward with your finger and
repeat the above cleaning procedures until the entire roller is cleaned.
Be careful not to snag or damage the pick springs.
3. Wipe the pad in the direction from top to bottom. Be careful not to
hook the pick springs.
4. Close the ADF unit. Your scanner is now ready for use .
ADF Pad
Feeding Roller
Pick Spring