Avision AV630CS - Manual (Page 24)

4-2
PC Users
1. Open your application and choose Select Source from the
File menu. If the Select Source command is not available
from the File menu, see the user guide of your application
to learn how the TWAIN link is used.
2. A dialog box appears containing the different TWAIN
sources for you to choose from to bring an image into your
application.
3. Select MrScan as the source.
4. You need to select MrScan for just once except when you
need to use the dialog box to select a different source. In
that case, you will need to select MrScan as the source
again before you can reuse the AV630CS scanner.
5. Place the document upside down on the document board
with the text facing away from you.
6. From the File menu, choose Acquire.
7. Avision TWAIN user interface as Figure 4-2 will pop up
on the screen. Click Preview or Scan button to scan the
document.