Avision AV626C User Manual
Page 22
4-7
Color Matching:
Adjusts the color quality of the image to
make it close to the original. This function
uses default parameters to adjust the image.
Reset:
Resets the scanning parameters you set.
Invert:
The invert command reverses the brightness
and the color in the image. For color images,
each pixel will be changed into its
complementary color at the command of
Invert
.
Calibration:
Defines Brightness for the scanner. Users are
recommended to calibrate the light source if
the scanned image looks undesirable or
comes out to be too dark.
Quality/Speed Mode:
Users can select the mode to perform
scanning according to their own need. Select
quality mode scanning if your emphasis is
on the quality of the scanned image. Or you
can select speed mode scanning if you want
to speed up the scanning process.
Pixel/Inch/Cm:
Represents the different measuring systems
to be used in each scan.