Avision FB2100_Green (BF-0505) - Manual (Page 59)

59
The “Reset Pad Count” button」：
After scanning approximately 50,000 pages (the number varies
based on type of scanner) through the Auto Document Feeder
(ADF), the ADF pad may be worn out and you may experience
problems with document feeding. In this case, it is highly
recommended to replace the ADF pad with a new one. (Please
refer to the manual for proper replacing procedure.) For
ordering the ADF pad, please consult your nearest dealer. After
replacing the ADF pad, click the “Reset Pad Count” button to
reset the pad count.
The “Reset Roller Count” button」：
After scanning approximately 200,000 pages (the number varies
based on type of scanner) through the ADF, the ADF roller may
be worn out and you may experience problems with document
feeding. In this case, it is highly recommended to replace the
ADF roller with a new one. (Note the replacement of the ADF
roller has to be performed only by authorized service center.
Therefore, please return your scanner for roller replacement.)
After replacing the ADF roller, click the “Reset Roller Count”
button to reset the roller count.
Note：
The lifetime and the replacing procedure vary based on type of
scanner. Please consult your nearest dealer for more details.