Avlex MU-53HNX Headworn Microphone - Manual (Page 6)

(Figure 1)
(Figure 2)
After installing the steel tube with microphone cable

onto steel tube holder

, fix the microphone wire in cable
holder

on the main frame

. As shown in (Figure 1)
After put on the headworn microphone as shown below,
user can use adjustable steel tube

to adjust the gap
between capsule and user's mouth if the gap is too large.
How to Adjust Your Headworn Microphone?
How to Assemble Your Headworn Microphone?
4
Headworn Microphone
(MU-53HN/MU-55HN/MU-53HNP)