Avlex ACT-71Ha Ultra-Wideband UHF - Manual (Page 4)

 Capsule Module: Protects detachable
microphone capsule module and internal foam
prevents breathing, wind and POP noises.
 Battery Compartment: Holds 2 'AA' batteries.
 Housing: Protects transmitter PCB, battery
compartment and batteries.
 LCD Panel: Displays transmitter parameters.
 Power On/Off Switch: Slides the power switch
to the “ON” position for use or to the “OFF”
position when not in use.
 MODE Button: Allows access to 6 available
functions displaying in LCD panel.
 SET Button: Parameter selection button.
 ACT Infrared (IR) Port: Receives signals from
receiver to synchronize frequencies.
 MUTE Button: To mute and un-mute the audio
signal temporary.
 Protection Cover: Protects power switch and
prevents user has direct access to power switch.
 Channel ID Clip: For channel identification
(Optional)
1
2
3
4
5
6
7
8
9
10
11
Wideband Handheld Transmitter Wideband Handheld Transmitter
Operating Instructions for Insertion &
Removing Battery
Caution:
Remove the batteries if unused for a long period
of time to prevent battery leakage, corrosion and
causes damage to electronics.
!
!
!
Turn the microphone housing and pull it toward
capsule grille to expose battery compartment.
Insert two new AA alkaline batteries in the
battery compartment with correct polarity
orientation.
Turn power switch to ON position after battery
installation. If LCD does not lit, please check
battery polarity or change to fresh batteries.
4 5