Avision AM7000N (MT-0904B) - Manual (Page 106)

100
Adding Watermark on Your Document
Before using this function, you need to enable watermark by pressing the Menu
button and then choose “2. Copy Setup” >“27 Watermark” >“ON” on the LCD
screen.
Adding An Image Watermark
To add a picture to your copied documents as watermark,
1. Select the Image Watermark option, and your desired picture path from the
Browse button.
2. Save your desired picture path by choosing one of the custom options, and click
the Save button.
3. If you wish to load the image to MFP, click the Load watermark to MFP button.
After completing loading the image, an Update Successfully message will
display on the screen.
4. Click the OK button to save all settings.