頁面 10, Grp: group setting, Ch: channel setting – Avlex ACT-818 Wideband Single-Channel Digital Receiver User Manual

Page 10: Wideband digital receivers

Advertising
background image

14

15

GRP cursor starts flashing

Turn clockwise to increase by one group

Turn counterclockwise to decrease by one group

GRP: Group Setting

Operating Procedure:

1. Press the rotary controller  to activate and move the cursor to the GRP

parameter. When the GRP cursor starts to flash, the Group is ready to be set.

2. Rotate the rotary controller clockwise to increase the Group number;

counterclockwise to decrease the Group number.

3. Press the rotary controller once to confirm and save the selected Group number (or

wait for autosave).

GRP

CH

BAND

ANT

MHz ACT

RF

AF

SQ

BA

EQ

ADD

Refer to the supplied channel plan for your band to select a specific frequency.

8

NOTE: When the SQ is set at full level (showing 5 bars), the "AutoScan" function

will be disabled and the user may freely select any preset group or channel
manually.

Operating Procedure:

1. Press the rotary controller  to activate and move the cursor to the CH parameter.

When the CH cursor starts to flash, the Channel is ready to be set.

2. Rotate the rotary controller clockwise to increase the Channel number;

counterclockwise to decrease the Channel number.

3. Press the rotary controller once to confirm and save the selected Channel number

(or wait for autosave).

Rotate the controller to AutoScan for an open,

interference-free preset channel

CH: Channel Setting

CH cursor starts flashing

GRP

CH

BAND

ANT

MHz ACT

RF

AF

SQ

BA

EQ

ADD

5

Wideband Digital Receivers

Wideband Digital Receivers

Advertising
This manual is related to the following products: