B&K Precision 4005DDS - Manual - Manual (Page 8)

6
Retain the original packing in case subsequent repackaging for return is required. Use
of the original packing is essential.
After the mechanical inspection, verify the contents of the shipment. The items
included with the instrument are:

Power cord

User manual

BNC to BNC cable

BNC to alligator clips
If the contents are incomplete, or if the instrument does not pass the specification
acceptance tests, notify B&K Precision.
3.2 Input Power Requirements
The instrument can operate on 115 or 230 VAC source at 50 or 60 Hz. The line
selector plug on the rear panel allows you to select the line voltage. Before
connecting the power plug to an AC line outlet, be sure to check that voltage selector
plug is set in the correct position corresponding to the line voltage in your location
and the fuse rating is as shown in the table.
Selector AC Input Fuse
115V 110 – 120 V, 50/60 Hz 0.6A
230V 220 – 240 V, 50/60 Hz 0.3A
Table 1 - Fuse Table