B&K Precision 4040A - Manual - Manual (Page 7)

7
SPECIFICATIONS
NOTE: See Maintenance section for AC Line Selection and fuse information. Specifications and information are subject to change without
notice. Please visit www.bkprecision.com for the most current product information.
SWEEP OPERATION
Mode: LIN / LOG
Width: 100:1, Continuously variable
Rate: 20mS to 2 sec, continuously
variable
Sweep Output: 0 to 2V
Start/Stop
Frequencies: Adjustable
AM MODULATION CHARACTERISTICS
Source: Internal, External
Modulation Ratio: 0 To 100%
INT. Modulation: 1kHz
EXT. Modulation: DC to 500KHz
EXT. Sensitivity: Less than 10V p-p for 100%
modulation
FM MODULATION CHARACTERISTICS
Source: Internal, External
Deviation: 0 to 5%
INT. Modulation: 1kHz
EXT. Modulation: DC to 500kHz
EXT. Sensitivity: Less than 10V p-p for 100%
modulation
BURST CHARACTERISTICS
Source: Internal, External
Burst Width: Continuously variable from 5%
to 90% of internal gating frequency
Repetition Rate: 0.5Hz to 50Hz, internal or DC to
500kHz, external
Burst Frequency: Determined by the main generator
frequency setting. Tone burst is in
integral cycles of frequency being
gated.
FREQUENCY COUNTER
Accuracy: Time Base Accuracy ±1
count
Time Base Accuracy: ±10PPM (23°C ±5°C)
Display: 5 digit LED
External Input:
Frequency: 5Hz to 30MHz
Resolution: 0.1, 1, 10, 100, 1 kHz
Sensitivity: ≤25 mV rms
Impedance: 1 MΩ/100 Pf
AC INPUT
120/230VAC ±10%, 50/60Hz, internal jumper selectable
DIMENSIONS (H x W x D)
10 1/2" x 5 1/2" x 12 3/8" ( 26.67cm x 13.97cm x 31.43cm )
WEIGHT
5.3 lb. (2.4 kg.)
ACCESSORIES
Output Cable, BNC to Alligator Clips
Instruction Manual