B&K Precision 4084-4087 - Manual - Manual (Page 11)

4080 series Function & Arbitrary/Function Generators –Instruction Manual
11
3. PANEL DESCRIPTION
3.1 Front Panel
3.1.1 Overview of Keys:
Summary: Most keys have multiple functions. Primary functions are written on the key. Simply
press the respective key to enable a primary functions. All Function/Mode keys and some of the
numerical entry keys have associated secondary functions indicated above each key in blue. To
activate a secondary function, press the 【shift】key followed by the desired key. The bottom row
of the Function/Mode keys can be used to enter units directly. The unit is indicated below each key.
To enter a unit, enter a numerical value via the numerical keypad then press the corresponding unit
key. The unit key also serves as Enter function.
Data entry keys:
Key
Name
Main
Function
Secondary
Function
Key
Name
Main function
Secondary
Function
0 Input Digit 0 Enter SW mode 7 Input Digit 7
Enable ARB7
waveform ***.
1 Input Digit 1
Enable ARB1
waveform ***
8 Input Digit 8
Enable ARB8
waveform ***
2 Input Digit 2
Enable ARB2
waveform ***
9 Input Digit 9 Not available
3 Input Digit 3
Enable ARB3
wave ***
●
Input decimal point Reset Unit
4 Input Digit 4
Enable ARB4
waveform***
▬
Input negative
symbol
Enter system menu
5 Input Digit 5
Enable ARB5
waveform ***
◄
Move arrow key to
left *
Select pulse
6 Input Digit 6
Enable ARB6
waveform***
►
Move arrow key to
right ** Select Arblist
waveform
*:
Direct number entry: Press this key to clear the least significant bit of the displayed number.
Useful for correcting number entry before entry is confirmed with unit key.
External totalize mode: Press this key to stop counting and display present counting value.
Press again to resume counting.