B&K Precision 4045B - Manual User Manual
Page 30
Advertising
30
Mode Menu
F1: Continuous – Selects continuous output.
F2: Triggered – Triggers one output cycle of the
selected waveform for each trigger event.
F3: Gated – Triggers output cycles as long as the
trigger source asserts the gate signal.
F4: Burst – Triggers ‘N’ number of output cycles for
each trigger event, where N ranges from 2 to 65,535.
After selecting the TRIGGERED, GATED, or BURST
menu, the trigger source menu is available:
Advertising