Baldwin 5720 Entrance Door Rim Lock - Manual

195
riM lOCKs –
standards & spECiFiCatiOns
Pride in our American Heritage and renewed interest in its early history
has greatly influenced U.S. architecture. With careful research and design,
Baldwin has authentically reproduced a piece of that heritage – colonial
rim locks.
> Constructed with solid forged brass parts for exceptional durability
and smooth operation
> Trim designs secured to a broached spindle with an epoxy (resin)
coated set screw – prohibits screw from loosening
> Interior rim locks use bit keys. Bit keys may be ordered fixed
permanently into the lock by ordering as .RBIT or .LBIT
configurations.
NOTE: Hand of door is always determined from outside
IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors
LEFT HAND CONDITION
(SINGLE DOOR)
RIGHT HAND CONDITION
(SINGLE DOOR)
Handing of Rim Lock Plates
rim lock mechanism