Multi-point, Entrance profile cylinder function exploded view, Installation instructions – Baldwin Boulder European Mortise User Manual
Page 2
Advertising
MULTI-POINT
INsTaLLaTION INsTrUcTIONs
SPRINGFIELD TRIM SHOWN
SEE HARDWARE
CATALOG FOR HOLE SPACING
EXTERIOR TRIM
LOCK BODY
SPINDLE
POSITION NOTCHES
TOWARDS DOOR
EXTERIOR
INTERIOR #8
MACHINE SCREWS
DRILL THRU 5/16”
SEE NOTE
PRESS-IN
BUSHINGS
#6 TURN KNOB
SET SCREW
INTERIOR TRIM
LOCK
CYLINDER
LOCK
CYLINDER
SCREW
THREADED
SCREW
POSTS
SEE NOTE
1/4” LEVER
SET SCREW
ALIGN WITH
SPINDLE GROOVE
#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers
before completely securing the #8 screws.
Threaded Screw Posts Note: Length may need to be cut down to accomodate different
door manufacturers’ hole pattern.
Entrance Profile cylinder Function Exploded View
©2007 BaLDWIN HarDWarE cOrPOraTION, rEaDING, Pa
PK 5901 (10/07)
Advertising
This manual is related to the following products: