Assistance, Troubleshooting, Malfunctions – Indesit BAAAN 10 User Manual

Page 16: Possible causes / solutions

Advertising
background image

16

GB

Assistance

Before calling for Assistance:

• Check if the malfunction can be solved on your own (see Troubleshooting).

• If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre

Communicating:

• type of malfunction

• appliance model (Mod.)

• serial number (S/N)

This information can be found on the data plate located

on the bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

The internal light does not illuminate.

The refrigerator and the freezer do not

cool well.

The food inside the refrigerator is

beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Some of the external parts of the

refrigerator become hot

The back wall of the refrigerator unit

is covered in frost or droplets of water

There is water at the bottom of the

refrigerator.

Possible causes / Solutions:

• The plug has not been inserted into the electrical socket, or not far

enough to make contact, or there is no power in the house.

• The doors do not close properly or the seals are damaged.

• The doors are opened too frequently.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position

• The refrigerator or the freezer have been over-filled.

• The atmospheric temperature of the area surrounding the appliance is

lower than 14°C.

• The TEMPERATURE ADJUSTMENT knob is not in the correct position.

• The food is in contact with the back inside wall of the refrigerator.

• The door is not closed properly or is continuously opened.

• The outside ambient temperature is very high.

• The thickness of the frost exceeds 2-3 mm (see Maintenance).

• The appliance has not been installed on a level surface (see Installation).

• The appliance has been installed between cabinets that vibrate and

make noise.

• The internal refrigerant makes a slight noise even when the compressor is

off. This is not a defect, it is normal.

• These raised temperatures are necessary in order to avoid the formation

of condensation on certain parts of the product.

• This shows the appliance is operating normally.

• The water discharge hole is blocked (see Maintenance).

Mod.

RG 2330

TI

Cod.

93139180000 S/N 704211801

220 - 240 V-

50 Hz

150 W

W

Fuse

A

Max 15 w

Total

Gross
Bruto
Brut

Compr.

Kompr.

Syst.

R 134 a

kg 0,090

Gross
Bruto
Brut

340

Net
Util
Utile

Gross
Bruto
Brut

Freez. Capac

Poder de Cong

75

Made in Italy 13918

Test

P.S-I.

Pressure
HIGH-235

LOW 140

kg/24 h

4,0

Class

Clase

N

Classe

model

serial number

195071226.01

06/2010

-

Xerox Fabriano

Advertising