Borg Locks BL 7000 Easicode Change instructions - Manual

Code Changing
BL7000 Easicode Change instructions
Step 1: Enter the currently programmed code into the keypad (as per fig.1).
Step 2: With the correct entered into the keypad the code change cam on the inside handle
can be turned from the 9o’clcok positioned black dot (as per fig.2) to the 12o’clock
positioned black dot (as per fig.3).
Please note under no circumstances should you need to force the code change key, if you
find the code change cam dose not move easily when using the supplied code change key,
an incorrect code has been input into the keypad. In the event that the code change key is
forced the code change spindle has been designed to twist prior to damaging the coding
chamber and therefore you will not be able to change the code. If you require a
replacement code change spindle Please call 01708 225700.