Borg Locks BL 2605MG Series - Manual (Page 4)

MAINTENANCE INSTRUCTIONS
WEEKLY
CLEAN THE SURFACE OF THE LOCK WITH MARINE GRADE CHROME
POLISHING LIQUID. SPRAY THE EXPOSED PARTS OF THE LATCH WITH
WD40 OR EQUIVALENT.
ANNUALLY
1. REMOVE THE LOCK FROM THE DOOR.
2. SPRAY THE INSIDE OF THE LOCK THOROUGHLY WITH WD40 OR
EQUIVALENT, THROUGH THE TUMBLER HOLES AT THE BACK OF
THE LOCK.
3. SPRAY ALL THE FIXING ACCESSORIES AND THE LATCH WITH
WD40 OR EQUIVALENT.
4. PUSH EACH OF THE BUTTONS AND ROTATE THE KNOB SEVERAL
TIMES TO MAKE SURE THE LOCK IS WORKING SMOOTHLY.
REMARKS
THE ABOVE MAINTENANCE PROCEDURES CAN BE CARRIED OUT
WHENEVER THE OPERATION OF THE LOCK IS STICKY.
.4.