Set up wi-fi connection – Brickcom WOB-100Ap User Manual
Page 13
Advertising
Confidential
© Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM
| EXPERT IN IP SURVEIL LANCE
•
Once connected to the WOB-100Ap’s web UI, select
Configuration
from the
right hand corner and
Wireless
from the left hand side menu.
•
Select the
Site survey
button to scan for available networks.
•
From the list of available networks, press the
Select
button of the SSID of the
DWRT-600N.
•
Click
Apply
to save the settings.
•
When asked to unplug the network cable, disconnect the Ethernet cable
connecting the WOB-100Ap to the DWRT-600N.
•
After approximately one minute, the wireless connection will be established.
Set Up Wi-Fi Connection
Advertising