Brickcom PZ-040 12x Series - Manual (Page 40)

36
A. Auto Iris
Enable to adjust iris automatically.
B. True Day & Night
a. Auto - The Network Camera automatically removes the filter by judging
the level of ambient light.
b. Manual - In day mode, enable the IR CUT to keep the IR cut filter
active at all times so the infrared light does not reach the sensor and
distort the color. In night mode.
C. White Balance
a. Disable - Disable the Auto White Balance function.
b. AWB - Enable to adjust the White Balance automatically. White
Balance is a feature used to compensate for different colors of light
being emitted by different light sources. It allows the camera to
calibrate the device to correctly display the colors.
D. Auto Focus
When this feature is enabled, the camera will focus automatically.
Click Apply to apply settings or Cancel to cancel changes.